Rosemount Smart Wireless Gateway Specifications download pdf (Page 22)

Reference Manual

00809-0200-4420, Rev HB

Section 3: Mounting and Connection

January 2015

Mounting and Connection

3.1.2 Physical description

For dimensional drawing information refer to 00809-0200-4420, Rev HB. The cast aluminum

housing encloses the electronics circuitry of the Gateway. The front of the enclosure has an

upper cover and a junction box cover. The upper cover provides access to the electronics and

radio. The junction box cover provides access to the terminal block.

To open either cover, use a ¼-in. bladed screwdriver to remove the appropriate screw on the

unhinged side of the enclosure.

3.2 Mounting

Find a location where the Gateway has optimal wireless performance. Ideally this will be 15-25

ft. (4,6 - 7,6 m) above the ground or 6 ft. (2 m) above obstructions or major infrastructure.

Figure 3-1 shows an example gateway installation.

Figure 3-1. Gateway Installation

A. Control Room

B. Ground

C. Gateway

D. Mast or Pipe

E. Infrastructure

15-25 ft.

(4,6-7,6 m)

6 ft. (2 m)

15 - 25 ft.

(4,6 - 7,6 m)

6 ft. (2 m)

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 85 86

No comments

Rosemount Smart Wireless Gateway Specifications Page 22